Midea Group
Aqua-C2.5 (S/H Version)
Aqua-C2.5
  • Excellent Safety

    Intelligent management of battery health, early warning of faulty batteries.

    Active ventilation and explosion venting design to control deflagration risks.

    Multi-level electrical protection and fire protection design, with arc flash analysis and collaborative protection functions.

  • Excellent Performance

    Modular design reduces failure impacts and improves system uptime.

    Active balancing technology and bionic-inspired solutions enhance battery lifespan and system discharge capacity.

    IEEE 693 high design level qualification compliance.

  • Optimal costs

    Back-to-back and side-by-side design reduces footprint.

    All pre-assembled, no battery module handling on site.

    Integrated AC/DC built-in bi-directional inverter, reducing commissioning time(for string pcs version).

  • Smart O&M

    Active balancing reduces energy storage station O&M costs.

    Rapid state detection and fault recording to achieve rapid positioning and analysis of system faults.

Aqua-C2.5 (S/H Version).PDF
Download
  • DC-side Parameters (S Version - String PCS)
    Cell Type
    LFP3.2 V / 314 A
    Battery Configuration
    1P416S*12
    Nominal Capacity
    5015.9kWh
    Battery Voltage Range
    1123.2~1497.6 V
    Nominal Battery Voltage 1331.2 V
  • AC-side Parameters (S Version - String PCS)
    Nominal Power

    1290 kVA *2 (Aqua-C2.5S 5015-2500-2h)

    1290 kVA (Aqua-C2.5S 5015-1250-4h)

    Current THD < 3% (nominal power)
    DC Component < 0.5%
    Nominal Voltage 690 V
    AC Voltage Range 607–759 V
    Nominal Frequency
    60 Hz
    Termination (LV)

    1080 A * 3 Phase * 2 (Aqua-C2.5S 5015-2500-2h)

    1080 A * 3 Phase (Aqua-C2.5S 5015-1250-4h)
    Power Factor ≥0.99 (nominal power)
    Power Factor Range - 1 to +1
  • System Parameters (S Version - String PCS)
    Auxiliary Power Supply
    400VAC, 50Hz / 60Hz
    480 V AC, 60 Hz
    Operating Ambient Temperature Range
    -30 °C to +55 °C (-22 °F to 131 °F)
    Relative Humidity ≤ 100% RH (non-condensing)
    Max. Operating Altitude
    4000 m (13123 ft)
    Ingress Protection (IP) Rating IP55
    Temperature Control Method Intelligent liquid cooling
    Weight (approx.)
    44000 kg (97003 lb)
    Corrosion-proof Grade

    C4, C5 (optional)

    Seismic Level
    IEEE 693 moderate design level qualification
    IEEE 693 high design level qualification (optional)
    Snow Load
    30 lb /sqft
    Wind Load
    129 mph
    Dimensions (W × H × D)
    6058 × 2896 × 2438 mm (238.5 × 114.0 × 96.0 in)
    Fire Suppression System
    Fire alarm control panel, Smoke and heat detectors, Alarm bell, Horn strobe, Gas detector, Ventilation system (NFPA 69 compliance), Dry pipes with sprinklers, Aerosol (optional), Deflagration vent panel (optional)
    Communication Interface Ethernet
    Standard Compliance


    UL 9540A, NFPA 855, NFPA 69, NFPA 68 (optional), UL 1973, UL 9540, UL 1741SB, IEEE 1547


    IEC62477-1, IEC62619, IEC61000, IEC62933, IEC63056, EN50549, G99, CEI 0-16, VDE-AR-N 4110, VDE-AR-N 4120,NTS 2.1, NTS SENP 1.1







    ©2026 Shenzhen CLOU Electronics Co., Ltd.
    All rights reserved. Subject to change without notice. Version 1.0 02/2026


  • DC-side Parameters (H Version - High-voltage Box)
    Nominal Energy 5015.9 kWh
    Nominal Power 2500 kW@0.5CP (Aqua-C2.5H 5015-2500-2h)
    1250 kW@0.25CP (Aqua-C2.5H 5015-2500-4h)
    Battery Voltage Range 1123.2-1497.6 V
    Nominal Battery Voltage 1331.2 V
    Cell Type LFP 3.2V/314Ah
    Battery Configuration 1P416S*12
  • System Parameters (H Version - High-voltage Box)
    Auxiliary Power Supply
    400VAC, 50Hz / 60Hz
    480 V AC, 60 Hz
    SOC Calculation Accuracy ≤ 3% (after balancing)
    Operation Ambient Temperature Range -30°C to +55°C (-22°F to 131°F)
    Relative Humidity ≤100% RH (non-condensing)
    Max. Operating Altitude
    4000 m (13123 ft)
    Ingress Protection (IP) Rating IP55
    Temperature Control Method Intelligent liquid cooling
    Weight (approx.) 42600 kg (93917 Ib)
    Corrosion-proof Grade
    C4, C5 (optional)
    Seismic Level
    IEEE 693 moderate design level qualification
    IEEE 693 high design level qualification (optional)
    Snow Load 30 lb /sqft
    Wind Load 129 mph
    Dimensions (W × H × D) 6058 × 2896 × 2438 mm (238.5 × 114.0 × 96.0 in)
    Fire Suppression System FACP, Smoke and Heat Detectors, Flammable Gas Detector, Horn strobe, Compliance Ventilation System, Dry Pipes with Sprinklers, Aerosol
    Communication Interface Ethernet (Fiber optional)
    Standard Compliance

    UL 9540A, NFPA 855, NFPA 69, NFPA 68 (optional), UL 1973, UL 9540, UL 1741SB, IEEE 1547

    IEC62933-5-2, EN62477-1, IEC61000, IEC62619, IEC63056, UN38.3/UN3536, CE




    ©2026 Shenzhen CLOU Electronics Co., Ltd.
    All rights reserved. Subject to change without notice. Version 1.0 02/2026