Tel: +1 518-289-5355
Email: info.us@szclou.com
Addr: 2860 Guilder Dr. Plano, TX 75074, US
Higher energy density delivers superior cost efficiency.
Side-by-side and back-to-back design reduces the footprint.
Integrated Ac&DC delivery cuts down construction costs.
Equipped with active ventilation and explosion venting system for maximum fire safety.
Innovative liquid-electric separation design lowers the risk of short circuits.
Al-based fault early warning system status to eliminate potential hazards proactively.
Active balancing significantly boosts system capacity over the entire lifecycle.
High-grade seismic and corrosion-resistant design,coupled with an advanced thermal management system, enables stable operation in extreme environments such as high/low temperature areas, sandstorm zones, salt spray regions and seismic zones.
Integrated string-type PCS with a one-cluster one-management mode effectively improves system availability.
Intelligent O&M minimizes downtime and maximizes power output.
| Cell Type | LFP3.2 V/587 Ah |
| Battery Configuration | 1P416S*8 |
| Nominal Capacity | 6251 kWh |
| Battery Voltage Range | 1123.2–1497.6 V |
| Nominal Battery Voltage | 1331.2 V |
|
Nominal Power
|
1563 kVA
|
|
Current THD
|
< 3% (nominal power)
|
|
DC Component
|
< 0.5%
|
|
Nominal Voltage
|
690 V |
|
AC Voltage Range
|
607–759 V
|
|
Nominal Frequency
|
50 Hz/60 Hz
|
|
Termination (LV)
|
1500 A × 3 Phase
|
|
Power Factor
|
≥0.99 (nominal power)
|
|
Power Factor Range
|
- 1 to +1
|
|
Auxiliary Power Supply
|
400 V AC, 50 Hz / 60 Hz
|
|
Operating Ambient Temperature Range
|
-30℃ to +50℃
|
|
Relative Humidity
|
≤ 100% RH (non-condensing)
|
|
Max. Operating Altitude
|
4000 m
|
|
Ingress Protection (IP) Rating
|
IP55
|
|
Temperature Control Method
|
Intelligent liquid cooling
|
|
Weight (approx.)
|
47000 kg
|
|
Corrosion-proof Grade
|
C3
C4 (optional), C5 (optional)
|
|
Seismic Level
|
IEEE 693 moderate design level qualification
IEEE 693 high design level qualification (optional)
|
|
Snow Load
|
1.44 kPa
|
|
Wind Load
|
57.7 m/s
|
|
Dimensions (W × H × D)
|
6058 × 2896 × 2438 mm
|
|
Fire Suppression System
|
Fire alarm control panel, smoke and heat detectors, alarm bell, horn strobe, gas detector, ventilation system (NFPA 69 compliance), dry pipes with sprinklers, aerosol (optional), deflagration vent panel (optional)
|
|
Communication Interface
|
Ethernet
|
|
Standard Compliance
|
IEC62477-1, IEC62619, IEC61000, IEC62933, IEC63056, EN50549
G99, CEI 0-16, VDE-AR-N 4110, VDE-AR-N 4120, NTS 2.1, NTS SENP 1.1
|
|
|
|
|
|
©2026 Shenzhen CLOU Electronics Co., Ltd.
All rights reserved. Subject to change without notice. Version 1.0 02/2026
|
|
Nominal Energy
|
6250kWh
|
|
Nominal Power
|
3125kW@0.5CP
|
|
Battery Voltage Range
|
1123.2-1497.6 V
|
|
Nominal Battery Voltage
|
1331.2 V
|
|
Cell Type
|
LFP 3.2V/587Ah
|
|
Battery Configuration
|
8P416S
|
| Auxiliary Power Supply | 400 V AC, 50 Hz / 60 Hz |
|
SOC Calculation Accuracy
|
≤ 3% (after balancing)
|
|
Operation Ambient Temperature Range
|
-30℃ -50 ℃ (55℃ optional)
|
|
Relative Humidity
|
≤100%RH (non-condensing)
|
| Max. Operating Altitude |
2000m
4000m (optional)
|
| Ingress Protection (IP) Rating | IP55 |
| Temperature Control Method | Intelligent liquid cooling |
| Weight (approx.) |
≤46000kg
|
| Corrosion-proof Grade |
C3
C4 (optional), C5 (optional)
|
| Seismic Level |
IEEE 693 moderate design level qualification
IEEE 693 high design level qualification (optional)
|
| Snow Load |
30 lb /sqft
|
| Wind Load |
129 mph
|
| Dimensions (W × H × D) | 6058 × 2896 × 2438 mm |
| Fire Suppression System |
Smoke and heat detectors, FACP, ventilation system, dry pipes with sprinklers, aerosol
|
| Communication Interface |
Ethernet (Fiber optional)
|
| Standard Compliance |
IEC 62993-5-2, EN 62477-1, IEC 61000, IEC 62619, IEC 63056, UN 38.3/UN 3536, CE UL 9540A
|
|
Transportation
|
Fully populated with battery packs
|
|
|
|
|
|
©2026 Shenzhen CLOU Electronics Co., Ltd.
All rights reserved. Subject to change without notice. Version 1.0 02/2026
|
